Eastey BB-2 SS, User Manual

Page: 13 / 37

Installation and Setup 13
Loading the Tape Cartridges
Turn the main power off and disconnect power.
CAUTION! To avoid personal injury, remove the tape cartridge before
loading tape.
When handling the tape cartridge be careful to avoid contact
with the tape cutting blade.
Lower Cartridge
To remove the lower tape cartridge, it is necessary to raise the upper taping head by
loosening the knob and raising the upper tape head to its highest upper position.
After raising the top tape head, remove the lower taping cartridge from the bottom
section by holding both lift points and, lifting leading with the rear lift point first, raising
the tape cartridge upward, out of the upper tape head seat.
Loosen Knob