background image

 

Components Of The Telescope 

 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 
 

 

Read the following information and instructions before use. Follow them and 
keep them for reference. 

 

 

 

 

- 1 - 

How to Care For Your Telescope 

 
Appropriate care of the telescope will allow many years of pleasant viewing enjoyment. 
 

The Objective Lens 

The objective lens of Telescope has been intensely polished and established to minute tolerances. It must 
be cleaned with care and as seldom as possible to avoid affecting    its precision and performance. An 
inexperienced person must never take the lenses out of their mount. 
 

Cleaning The Lens

 

Clean the lens only when it is required. The first step is to remove the dust with a camelhair brush or an 
ear-type syringe. Set few drops of ether or isopropyl alcohol on a piece of clean cotton that has been 
washed several times and wipe the lenses very delicately, avoiding circular motion. In addition, blow any 
remaining lint or dust off with an ear-type syringe. 
 

Sudden Temperature Changes 

If possible, avoid taking the telescope from cold outside air into a warm room. This will make the objective 
lens to be covered with condensed moisture, which must be removed at once. To do this, place the 
objective lens at a safe distance from heat source and let it warm slowly until the moisture has vanished. 
 
 

It is important to note that any stains left on the lenses must be   

delicately wiped off after the lenses are completely dry. 

 

-------------------------------------------------------------------------------------------------------------------------------------------- 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

- 2 - 

WARNING !

 

THIS TELESCOPE SET IS APPROPRIATE FOR CHILDREN OVER 8

YEARS OLD. OTHERWISE, SUPERVISION OF AN ADULT IS REQUIRED.

CAUTION !

   

DO NOT VIEW SUN THROUGH TELESCOPE AS SERIOUS INJURY TO

EYE MAY RESUT. 

1. Micro-Adjustable 

Altitude 

Control 

2. Focusing 

Ring 

3. Focusing 

Tube 

4. Diagonal 

Mirror 

5.  Fine Focus Adjustment Control
6. Eyepiece 
7. Finderscope 

Position 

Adjustment Control 

8. Finderscope 

Bracket 

9. Finderscope 

Adjustment 

Screw 

10. Finderscope 
11. Spirit Level 
12. Compass 
13. Altitude Scale 
14. Telescope Tube 
15. Lens Hood 
16.  Objective Lens Lid(not shown)
17.  Objective Lens (not shown) 
18.  Azimuth Locking Knob 
19. Accessory Tray 
20. Height Adjustment Clamp 
21. Tripod Leg 
22. Mount 
23.  Altitude Control Locking Knob
24.  Yoke Locking Knob 
25.  Erecting Eyepiece / 21X 

Microscope 

26. 3X Barlow Lens 

 

Astronomical Terrestrial Telescope 

Fig.  2

Summary of Contents for 9920































Reviews: