background image

select. The focal length of the eye lens is usually indicated on the eyepiece itself. 

 

 

 

 

 
The longer the focal length of the eyepiece, the less the magnifying power of the 
telescope; the shorter the focal length, the greater the power.  So when you 
select an eye lens to insert into the diagonal prism, you're really choosing what 
magnifying power you wish to use for observation. 

 
 

Using the digital camera module as a PC camera: 

 
1. 

Screw the objective lens unit back to the digital eyepiece module if it has 
been removed for telescope viewing. Care should be taken not to leave 
fingerprints or dust on the lens and the sensor of the camera. 

 
2. 

Place the camera unit on the stand as shown below. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 10 

 
3. 

Connect the camera module to the USB port of the computer 

4. 

Start “PhotoImpression” or other Imaging applications from the Windows 
Start menu. 

5. 

Adjust the focus by rotating the lens until a clear image is displayed. 

6. 

You can take still pictures and save them in the computer using the same 
procedure as described in the section “Using the Telescope in Digital Mode”. 

7. 

To use the camera module as a web camera for video conference, you need 
to install applications like “Netmeeting” or “MSN Messenger”, which can be 
downloaded from Microsoft’s web site. Please refer to the corresponding 
application manual. 

 

Handling note: 

 

The image sensor inside the digital eyepiece is a delicate integrated circuit and 
must be handled carefully. When you remove the lens from the camera, dust may 
fall on the sensor. Only use a blower to clean the dust. Never touch the sensor. 
 

Battery Installation 

(For model 9940, 9950 only)

 

 
The telescope body requires three AA size batteries for remote focusing operation. 
Replace the battery when the focusing speed becomes slow. Power off the 
telescope and unscrew the battery door on the underside of the telescope tube 
and insert the batteries according to the polarity mark (Figure 11).   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 11 

 
 
 
 
 
 
 
 
 

             700mm (focal length of objectives lens) 

                                20

mm (focal length of eyepiece)

 

Example:

 

= 35X (power)

 

Tilt Adjustment
Knob 

Rotate to Pan Left 

or Right

                                                         

11

                                                                                                                         

12

Summary of Contents for 9920































Reviews: