1.
If you have been using the digital eyepiece module as a web camera,
unscrew the objective lens unit from the camera (figure 2).
Figure 2
2.
Screw the digital eyepiece zoom adaptor lens to the eyepiece position
(Figure 3). Make sure the adaptor lens is screwed in tightly.
Note: Use the zoom ring to change the zoom ratio while viewing on the
computer.
Figure 3
3.
Insert the digital eyepiece to the telescope as shown in figure 4.
Figure 4
4.
Make sure the digital eyepiece is connected to the USB port of the
computer.
5.
Start “PhotoImpression” program from the Windows Start menu. The
application will start with the “Get Photo” screen. Here you can select the
device which you get your photo from. If you have correctly connected the
Digital Telescope, you should be able to select the “Video” icon. (On some
systems, the “Video” icon may not be selectable. In such case, get photo
from “Camera/Scanner” and then select “WIA-USB Video Device”.)
3
4
Zoom Ring
