![background image](http://html1.mh-extra.com/html/east-tester/et45-series/et45-series_user-manual_522216016.webp)
ET4501/4502/4510 台式 LCR 数字电桥操作手册
杭州中创电子有限公司
13
Fig 4-4
(
2
)
Comparator switch
Method one:
In the Interface of Measurement Display, move the cursor to the comparator through the left
and right direction keys , and then turn on / off the comparator through the up and down direction
keys.
Method Two:
In the Comparator Setting interface, move the cursor to the comparator via the up and down
direction keys, and turn on / off the comparator through the left and right direction keys.
(3) Tolerance Selection
Method one:
Step 1: Turn on the instrument to enter the interface of measurement display, press the
key to enter the Interface of Measurement Setting with the interface as shown in Fig.4-5.
Step 2: Use the direction key to move the cursor to the upper and lower limits of the set gear
and press the
key to switch to the next tolerance value (1%, 5%, 10%, 20%) as shown in
Fig.4-6
Fig 4-5
Fig 4-6
Summary of Contents for ET45 Series
Page 2: ......