![background image](http://html1.mh-extra.com/html/east-tester/et45-series/et45-series_user-manual_522216010.webp)
ET4501/4502/4510 台式 LCR 数字电桥操作手册
杭州中创电子有限公司
7
interface displays SHIFT, it represents the number 8.
Record the maximum/minimum/average of the measurements during the period.In
input mode, when the interface displays SHIFT, it represents the number 9.
Quickly switch to point solution capacitance mode.In input mode, when the interface
displays SHIFT, it represents the number 0.
Quickly switch to equivalent mode.
In input mode, the interface displays SHIFT to
represent the decimal point.
Press the button again to enter the open circuit short circuit calibration mode, and press
the button again to enter the calibration state. After the calibration is completed, press the button
again to exit the calibration mode and return to the normal mode.In input mode, when the interface
displays SHIFT, it represents the symbol '-'.
3.3 Introduction of Rear Panel
Fig.3-2 Rear Panel
SN
Description
1
Power jack: AC 220V / 50Hz power supply input socket.
2
Voltage selector: 110V / 60Hz VAC or 220V / 50Hz VAC.
3
RS232 INTERFACE.
4
USB Device interface.
3.4 User Interface
3.4.1 Interface of Measurement Display
Fig.3-3 Interface of Measurement Display
Summary of Contents for ET45 Series
Page 2: ......