![background image](http://html1.mh-extra.com/html/east-tester/et45-series/et45-series_user-manual_522216013.webp)
ET4501/4502/4510 台式 LCR 数字电桥操作手册
杭州中创电子有限公司
10
Fig.4-1
Fig.4-2
4.2.2 Level Selection
Step 1: Turn on the instrument to enter the interface of measurement display; move the cursor
to the level through the left and right direction keys.
Step 2 : Switch the cursor to the level display area by using left and right direction keys, or
switch to the next test level by directly pressing
. (Commonly used test level list: 100
mV, 300 mV, 600 mV, 1 V, 1.5 V, 2 V)
Step 3:
1. Increase or decrease the test level by using the up and down direction keys (the commonly
used test levels are as shown above).
2. The step 3 of frequency set as reference
4.2.3 Offset Selection
Turn on the instrument to enter the interface of measurement display, move the cursor to the
bias through the left and right direction keys, press the
key to enter the level automatic
setting interface with the interface as shown in Fig.4-3.
Fig.4-3.
Summary of Contents for ET45 Series
Page 2: ......