Easson Premium SC-100 Manual Download Page 40

Page: 40 / 108

)

XZ/YZ

plane - Machine an inclined surface

)

plane - to accurately datum the work piece at an inclined angle

Function :

During a machining process, it is quite
common to machine an inclined surface.

If the work piece is small or the accuracy
requirement is quite low, the operator can
simply work on an incline or rotary
table to machine the inclined working
surface easily.

However, when the

work piece is too big

be installed onto the incline table, or the

accuracy requirement is high,

the only

solution is to calculate the machining
points or datuming points using the mathematical
method. This is generally very time consuming.

The SC-100 provides easy-to-use

INCL

function

to help the operator for precision inclined surface
datuming and machining.

Application of the INCL function are as follows :

- 32 -

Summary of Contents for Premium SC-100













































































































Search results

Summary of Contents for Premium SC-100

Reviews:

Related manuals for Premium SC-100

Brands by name

Popular brands

Easson Premium SC-100, Manual

Search results

Summary of Contents for Premium SC-100

Reviews:

Related manuals for Premium SC-100

Brands by name

Popular brands