manualshive.com logo in svg

Easson Premium SC-100, Manual, Page: 29 / 108

Share
Download
Easson Premium SC-100 Manual Download Page 29

DIGITAL  COUNTER

Made in Taiwan

 SC-103

ABS

abs
inc

½

ref

sdm

inch

mm

R

R

R

9

8

7

4

5

6

1

2

3

CE

0

cal

sin

COS

tan

M

in

M

R

+

ENT

ENT

ENT

ENT

X

X

0

Y

Y

0

Z

Z

0

A calculator is used frequently during a manual machining process..

              

SC-100 is the first DRO that has a built-in calculator

The built-in calculator of the SC-100 not only provides normal mathematical calculations
such as add, substract, multiply & divide, it also provides useful trigonometric calculations
that are frequently required during a machining process such as 

SIN, COS, TAN,

SQRT

 and also 

inv 

SIN, 

inv 

COS, 

inv 

TAN, SQUARE...

In addition a major feature of the  calculator of  the SC-100 is "

Result Transfer

", in that

all calculated results from the calculator of SC-100 can be "transferred" to any axis to enable 
you to position the tool.  After the result has been transferred  to an axis, the SC-100 will 

temporarily 

preset the zero position at the calculated value, enabling the operator

 to simply move the machine back to axis display =  0.000, leaving the tool positioned at
 the calculated coordinate .

The built-in calculator offers the following advantages :

1. Operations are the same as commerically availiable calculators and it is easy to use ;

2.   The calculated result can be directly transfered to any axis, eliminating the need to 
      make notes of a calculation on paper, thus saving time and avoiding errors;

3.   No unnecessary down-time in finding or sharing calculators whenever you need
      one to make calculations.

"

Result Transfer

"

 key

Function :

Press this key to transfer calculated
result to the axis display, then SC-100
will temporily preset the zero at calculated
value, operator then just moves the machine until
display = 0.000, and the calculated position
is reached.

key to enter AXIS position 
    into calculator function

Calculated  Result  Display

"Inverse" key 
  for trigonmetric
   calculations

 "CE" key
as normal calculator

Calculator keypad

trigonmetric calculations  key

Key layout of the built-in calculator

"Calculator" key

key to enter into calculator function

- 21 -

Summary of Contents for Premium SC-100













































































































Reviews:

No comments