11
1.
Fix the backplate to a wall or structure with sufficient
load-bearing capacity using the 4 screws provided in
the mounting kit. Use suitable wall plugs for mounting
and observe the recommended installation height
(see below).
2.
Turn off the power before proceeding with the
installation.
NOTICE!
If you are going to install multiple backplates,
now would be a good time to mount them as well.
IMPORTANT!
The installation wall must cover the entire
back of the product.
1
Backplate
Mounting
2
130–140 cm
Recommended installation height
1
1
1
1
Backplate
Preparing
3
1.
Shorten the sealing plug to fit the cable. The hole
should be slightly smaller to ensure a good seal.
2.
Insert the cable through one of the 4 cable entries
and secure it to the backplate with the strain relief
provided.
3.
Close all cable entries that are not in use with the
blind sealing plugs supplied.
1
2
3
3
3
1
2
3
