10
WARNING! This product shall only be
installed, repaired or serviced by an
authorised electrician. All applicable
local, regional and national regulations
for electrical installations must be
respected.
WARNING!
Turn off the power before
you begin the wiring. Use extreme
caution and follow instructions carefully.
Installation
instructions
WARNING!
Be sure to read the safety instructions (page
7) of this product before you start the installation.
1.
Bend down the lower part of the rubber cover and
insert the two ends of the supplied tool into the two
openings at the bottom of the front cover.
2.
Pull the tool until the front cover comes loose and
remove the cover.
3.
Grasp the Type 2 socket and push upwards with good
force until the Chargeberry disconnects.
1
1
1
2
1
3
Opening
Charging Robot
In addition to the instructions presented on the
next pages, we recommend that you watch
the installation videos available on our website:
.
