![background image](http://html1.mh-extra.com/html/earthway/flex-select-series/flex-select-series_assembly-instructions-manual_3449011001.webp)
FLEX-SELECT Series
Broadcast Spreader
MODEL # F80
ASSEMBLY INSTRUCTIONS
F80_RevJul2021
PAGE 1
SIDE SPREAD CONTROL
SIDE SPREAD CONTROL
SIDE SPREAD CONTROL
SIDE SPREAD CONTROL
Patent U.S. 10,993,368
Your EarthWay spreader includes a patented
feature to prevent fertilizer from being spread
to the left side. Unlike competitor designs that waste the
fertilizer, side spread control keeps unneeded fertilizer
off sidewalks, driveways, and parking lots. Read
OPERATING INSTRUCTIONS
(Page 8) to activate this
feature.
PRIOR TO ASSEMBLY, YOU WILL NEED
PRIOR TO ASSEMBLY, YOU WILL NEED
PRIOR TO ASSEMBLY, YOU WILL NEED
PRIOR TO ASSEMBLY, YOU WILL NEED::::
7/16″ Wrench
Ratchet
7/16” Socket Pliers
HELPFUL HINTS
Read the directions before assembly.
If your spreader does not spread evenly, be sure “FRONT” on the GEARBOX points to the front of the spreader.
The
impeller must turn clockwise when pushing forward
. Reversing the GEARBOX during assembly will cause issues.
Your spreader is calibrated for three miles per hour, which is a brisk walking speed. Slower or faster speeds will
change the spread pattern. Wet fertilizer will also change the spread pattern and flow rate.
Do not use powdered
materials as it will damage the gearbox.
Gears are permanently lubricated at the factory. Do not open the GEARBOX or dirt may enter.
Visit our
EarthWay
website to see the
assembly video
2
1
/4
”
2