background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

23

Operator's Manual

CS3814, CS3816, CS4116 Chainsaws

explanation of emissions control Warranty provisions
Viper Engines are designed, built and equipped to meet all EPA 

requirements.  It warrants that it is free from defects in material and 

workmanship that could cause failure to the warranted part; and that 

it is identical in all material respects to the engine described in the 

manufacturer's application for certification. When a warrantable condition 

exists, Viper will repair your engine at no cost to you, including parts and 

labor.  The engine emissions label will indicate certification information.   

If the purchaser is in need of a warrantable repair and is not within 100 

miles distance from an Ardisam authorized repair center, Ardisam will 

pay for shipping costs to and from an authorized Ardisam repair center. 
Listed below are the parts covered by the emissions control systems warranty.  

Some parts listed below may require scheduled maintenance and are 

warranted up to the first scheduled replacement point for that part.  Coverage 

under this warranty includes only the parts listed below (the emission and 

evaporation control systems) if so equipped:

•  Air Filter Assembly (only to the first scheduled replacement point)
•  Fuel Filter (only to the first scheduled replacement point)
•  Carburetor
•  Fuel Lines, Fuel Line Fittings and Clamps
•  Fuel Metering Valve (if equipped)
•  Evaporative System (if equipped)
    - Canister (if equipped)
    - Canister filter (if equipped)
    - Vapor hose (if equipped)
    - Orifice connector (if equipped)
    -Fuel tank
    -Fuel cap
    -Primer bulb canister (if equipped)
•  Spark Plugs
•  Magneto Ignition System 
•  Muffler Assembly

limitations
The Emission Control Systems Warranty shall not cover any of the fol-

lowing:
a) Repair or replacement required because of misuse or neglect, im-

proper maintenance, repairs improperly performed or replacements 

not conforming to Ardisam, Inc. specifications that adversely affect 

performance and/or durability and alterations or modifications not 

recommended or approved in writing by Ardisam, Inc.

b) Replacement of parts and other services and adjustments necessary 

for required maintenance at or after the first scheduled replacement 

point;

c) Consequential damages such as loss of time, inconvenience, loss of 

use of the engine or equipment, etc.

d) Diagnosis and inspection fees that do not result in eligible warranty 

service being performed; and

e) Any add-on or modified part, or malfunction of authorized parts due 

to the use of add-on  or modified parts.  

The warranty on emissions-related parts is as follows:
•  Any warranted part that is not scheduled for replacement as required 

maintenance in the owner's manual supplied, is warranted for the war-
ranty period stated above.  If any such part fails during the period of 
warranty coverage, that part will be repaired or replaced at no charge to 
the owner.  Any such part repaired or replaced under the warranty will be 
warranted for the remaining warranty period.

•  Any warranted part that is scheduled only for regular inspection in the 

owner's manual supplied, is warranted for the warranty period.  Any 
such part repaired or replaced under warranty will be warranted for 
the remaining warranty period.

•  Any warranted part that is scheduled for replacement as required main-

tenance in the owner's manual supplied, is warranted  for the period of 
time prior to the first scheduled replacement point for that part.  If the 
part fails prior to the first scheduled replacement, the part will be repaired 
or replaced at no charge to the owner.  Any such part repaired or replaced 
under warranty will be warranted for the remainder of the period prior to 
the first scheduled replacement point for the part. 

•  Add on or modified parts that are not exempted by the Air Resources 

Board may not be used.  The use of any nonexempted add on or 
modified parts by the owner will be grounds for disallowing a war-
ranty claim.  The manufacturer will not be liable to warrant failures 
of warranted parts caused by the use of a nonexempted add on or 
modified part.

These items will be covered for a period of two years from the date 

of the original purchase.  Viper warrants that: the components are 

designed, built and equipped so as to conform with all applicable 

regulations adopted by the EPA; that they are free from defects in ma-

terial and workmanship that could cause failure to the engine or other; 

and that the components used are identical in all material respects to 

the engine described in the manufacturer's application for certifica-

tion.  The warranty period begins on the date the engine is originally 

purchased. 

maintenance and repair reQuirements
The owner is responsible for the proper use and maintenance of the 

engine.  Ardisam, Inc. recommends that all receipts and records cov-

ering the performance of regular maintenance be retained in case 

questions arise.  If the engine is resold during the warranty period, 

the maintenance records should be transferred to each subsequent 

owner.  Ardisam, Inc. reserves the right to deny warranty coverage if 

the engine has not been properly maintained; however, Ardisam, Inc. 

may not deny warranty repairs solely because of the lack of repair 

maintenance or failure to keep maintenance records.

Normal maintenance replacement or repair of emission control devices 

and systems may be performed by any repair establishment or individuals;  

however, warranty repairs must be performed by an Ardisam authorized 

service center.  Any replacement parts or service that is equivalent in 

performance and durability may be used in non-warranty maintenance 

or repairs, and shall not reduce the warranty obligations of the engine 

manufacturer. 

Summary of Contents for CS3814

























Reviews: