background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

3

Operator's Manual

CS3814, CS3816, CS4116 Chainsaws

!

 danger

danger indicates a serious injury or fatality 

Will result if the safety instructions that 

folloW this signal Word are not oBeyed.

 Warning

Warning indicates a serious injury or fatality 

could result if the safety instructions that 

folloW this signal Word are not oBeyed.

 caution

caution indicates you can or your eQuipment 

can Be hurt if the safety instructions that 

folloW this signal Word are not oBeyed.

 important

important indicates helpful information for 

proper assemBly, operation, or maintenance 

of your eQuipment.

 Warning

you must read, understand and comply With 

all safety and operating instructions in 

this manual Before attempting to setup and 

operate your chainsaW.
failure to comply With all safety and 

operating instructions can result in loss of 

machine control, serious personal injury to 

you and/or Bystanders, and risk of eQuipment 

and property damage. the triangle in the text 

signifies important cautions or Warnings 

Which must Be folloWed.
california proposition 65 Warning

engine exhaust from this product contains 

chemicals knoWn to the state of california 

to cause cancer, Birth defects, or other 

reproductiVe harm.

oWner’s responsiBility

Accurate assembly and safe and effective use of the chainsaw is 

the owner’s responsibility.
•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the chainsaw according to directions and schedule 

included in this Earthquake operator’s manual.

•  Ensure that anyone who uses the chainsaw is familiar with 

all controls and safety precautions.

special messages

Your manual contains special messages to bring attention to 

potential safety concerns, machine damage as well as helpful 

operating and servicing information. Please read all the infor-

mation carefully to avoid injury and machine damage.

NOTE: General information is given throughout the manual 

that may help the operator in the operation or service of 

the machine.

 

this symbol points out important safety instruc-

tions which if not followed could endanger your 

personal safety. read and follow all instructions 

in this manual before attempting to operate this 

equipment.

Before operating engine:

please read this section carefully. Read entire operating and 

maintenance instructions for this product.  Failure to follow 

instructions could result in serious injury or death.  Operate the 

chainsaw according to the safety instructions outlined here and 

inserted throughout the text.  Anyone who uses this chainsaw 

must read the instructions and be familiar with the controls.

Warnings and safety precautions

Summary of Contents for CS3814

























Reviews: