EarthLinked Technologies Prime-025, Quick Start Instructions

Page: 25 / 60

PSD-QS (02/16) Page 25
The PSD compressor unit internal heat recovery system contains a water high temperature control. It
is factory set to 140°F. The heat recovery system also contains a refrigerant low temperature which is
factory set to 130°F. Also, a freeze protection control is designed to operate the circulating pump
when water temperature drops to 40°F, in order to provide water circulation independent of
compressor operation.
The GSTE storage water heaters are available in 60, 80 and 119 US gallon capacities, all of which
have a 4.5 kW electric heating element, which provides the following recovery rates for increases in
water temperature.
ΔT
30 40 50 60 70 80 90
GPH 62 46 37 31 26 23 21
*
ΔT in ºF; GPH in U.S. Gallons per hour.
WARNING!
The PSD compressor unit and associated water piping must be in an
environment maintained at a temperature of at least 40°F to avoid the
potential freeze-up problems which can cause equipment failure and
damage to the occupied structure.