EarthLCD ezLCD-405 Page 43 Manual Download

Page: 43 / 173

e z L C D -‐ 4 0 5

Rev.

1.6 SD Card Operations
1.6.1 Introduction

The ezLCD-‐405 has a set of

commands

, which perform write and read operation on the SD

(Secure Digital) memory card, connected through the

SD/MMC

interface. The SD Memory Card

Specification V1.0 is supported.

The SD Memory Card is "seen" by the ezLCD-‐405 as an external memory (8bit x Card Size), as it

is shown on the drawing below

Note:

The ezLCD firmware ignores the position of the SD CardWrite Protect Switch.

The SD Card Size can be read by using the

SD_SIZE

command.

The ezLCD firmware supports 2 types of SD Card operations:

File Operations

The SD card is treated as a formatted disk. FAT12, FAT16 and FAT32 file systems are

supported. The user data is stored in files. Besides the ezLCD, the files may be read or

written by SD Reader/Writer connected to any computer. For more information, please

refer to Chapter:

SD File

Operations

Raw Operations

The SD card is treated as a memory. The user data is stored at addressed memory locations. For
more information, please refer to Chapter:

SD Raw Operations

Summary of Contents for ezLCD-405














































































































































































Search results

Summary of Contents for ezLCD-405

Reviews:

Related manuals for ezLCD-405

Brands by name

Popular brands

EarthLCD ezLCD-405, Manual

Search results

Summary of Contents for ezLCD-405

Reviews:

Related manuals for ezLCD-405

Brands by name

Popular brands