e z L C D -‐ 4 0 5
|
14
Rev.
© 2016 Earth Computers Tech. Inc.
e)
Startup Settings
The startup settings is automatically set to “ezLCD Default” but you can change the settings
so that whenever the ezLCD-‐405 turns on or resets then it will display the things you want.
1.
Default Transmitter -‐ by default it is set to Serial which is used when the device is
connected via USB
2.
Backlight -‐ you can control the brightness of the screen or you can just turn off
the light which makes the screen black.
3.
Start Screen -‐ You can either have the Default, Image or Solid Color start screen.
·∙
Image -‐ See Images (steps a-‐g) and you can select the ID number of the
image in the “Image Number” section and plot the x and y position
·∙
Color -‐ select “Solid Color” and click the “ … “ button to choose a color
Summary of Contents for ezLCD-405
