INSTALLATION
PAGE 10
SURROUND ASSEMBLY
NOTE: Do not face seal over chimney cooling air
system on superior brand or any brand fireplace
which is designed with the chimney cooling air sys-
tem.
13. Pull the insert slightly forward to its desired position;
attach the face shield using the surround clips and
hardware as shown. The fiberglass insulation strips
should be secured along the top and sides (step 3).
Assemble the gold-tone trim using the 2 inside cor-
ner brackets. Attach trim to the face shield and
stove.
Push the unit back until face shield insulation is com-
pressed against the fireplace front, forming a tight seal.
Test for air leaks by holding a candle around edge
of face shield to see if smoke is pulled into fire-
place.
* Note: Preferred method of attaching connector to flue
outlet is to install two L-Brackets (1” angle bracket, 3/4”
wide) on opposite sides of the flue outlet: Use self-
tapping screws to secure in place. Cut a ½” (height) and
¾” (width) notch in the front of connector (pipe, liner or
adapter that will attach to flue outlet). Install connector
into flue outlet and secure to angle brackets using ma-
chine screws. Seal around connection with furnace ce-
ment.