background image

Main Features

The Earlex SteamMaster® is a professional,
fast-action steam wallpaper stripper. It has
many added features;

Each tank is individually pressure tested.
Storage spools for the hose and the mains
lead.
Neon mains On/Off switch,
Patented stand to enable user to reach the
top of the wall.
Cooler running steam hose.

Caution!

Check the state of your plaster before
starting work.
Steam can loosen weak, porous or poorly
bonded plaster - which also loosens readily
if cracked, holed or if steam plate is held in
one position for too long after the paper is

soaked.
Weak plaster can normally be detected by
tapping a few areas of the wall. A hollow
sound indicates that you should proceed
only with extreme care - stopping
immediately if you hear a cracking sound or
plaster starts to break loose.

The steam stripper is safe for drywall/plaster
board surfaces but whatever the material, it
is always wise to check a small area before
starting work properly.

Protect your home!

The heat generated by the boiler unit can
mark carpets, soft furnishings, table tops,
cabinets etc.
Dust sheets or newspapers are not suitable
heat protectors for delicate surfaces.

2

Safety Rules

Keep away from children and animals.

Do not pull by the mains lead or the

steam hose.

Be careful of overhead dripping, when

using on overhead areas tilt the steam 
plate away from the face and body, and 
regularly empty the steamplate of any 
collected condensation.

Do not leave unattended.

Do not point the steam plate at anyone.

Do not allow water or steam to enter light 

switches or sockets.

Always use and store upright.

Always visually check that the hose and

steam plate inlet are not blocked before 
attempting to use.

Do not strain, kink or trap the hose under 

heavy objects.

Use only 4lb pressure cap as supplied. It 

is also a safety valve.
NEVER BLOCK OFF THIS OUTLET.

NEVER remove the filler cap when unit is 

boiling - switch off and wait for 5 minutes.

Before standing on the frame ensure all

screws are tight and the frame is
undamaged.

Never use outside when raining.

Always disconnect power supply when

filling the machine or when not in use.

Do not use any caustic cleaners on the

tank.

Do not allow to boil dry.

Do not overfill the reservoir. DO NOT

USE ADDITIVES.

Never detach the hose whilst the unit is

switched on.

The tank becomes hot in use. Do not

touch. Only move with the carrying frame.

Steam is produced at 100

o

C. Wear

protective clothing and gloves when
operating this stripper.

When standing on the stripper always

remain within the confines of the step and 
do not over-reach.

DO NOT USE THIS STRIPPER FOR

ANY OTHER PURPOSES THAN
DETAILED IN THESE INSTRUCTIONS.

Under no cirumstances should you

attempt to repair a unit unless qualified
and authorised to do so. Use only genuine
Earlex replacement parts.

Maximum weight for standing on the unit

is 127 kg (20 stone) and no more 
than 1 person at a time.

Summary of Contents for Steam Master LMB110V









Reviews: