background image

8

GUARANTEE

This product is guaranteed for a period of 2 years for ordinary use and 6 months for hire purposes or where the
unit is lent to other users. The tank is guaranteed against corrosion for 3 years. The guarantee is against faulty
materials or workmanship.
Whilst every possible care is taken by Earlex to ensure that our products leave the factory in good working
order, Earlex cannot under any circumstances accept liability for problems or damage caused by their
subsequent use. It is the responsibility of the user to ensure that surfaces to be treated, cleaned or stripped are
suitable for steam.

This guarantee does not affect your statutory rights.
In the event of a fault occuring please contact our helpline before returning the unit to our Service Department
at the address below together with a copy of your purchase receipt. All repairs will be dealt with speedily.
If the guarantee card is not returned within 14 days from the date of purchase the guarantee is limited to date of
product manufacture.

Mains connection 230V UK only

The stripper is supplied fitted with a 13 amp
plug top and fuse. If a replacement fuse is
required this must be rated at 13 amps. If in
doubt consult an electrician.
WARNING - THIS APPLIANCE MUST BE
EARTHED. For your total protection it is
recommended that a residual current circuit
breaker (RCCB) should be used in
conjunction with the stripper; Min. 15 amp -
Max. 20 amp.
If any electrical component is damaged or
faulty, it must be replaced by the
manufacturer or its appointed service agent
or a similarly qualified person in order to
avoid hazard.
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:

The wire which is coloured green and

yellow must be connected to the terminal in
the plug which is marked with the letter 

E

or

by the earth symbol, or coloured green or
green and yellow.

The wire which is coloured blue must be

connected to the terminal which is marked
with the letter 

N

or coloured black.

The wire which is coloured brown must be

connected to the terminal which is marked
with the letter 

L

or coloured red.

Mains connection 110V UK only

The stripper is fitted with a 16 amp industrial
plug for insertion into a suitable transformer
or generator supplying 110V a.c. outlet. If
this mains cable becomes damaged it
should be replaced with our Part No.
PS0155.

Extension Leads 230V

If you are using an extension lead it must be
rated at a 

minimum of 13 amps and fully

unwound.

Do not operate with a lead rated

at less than 13 amps as this will cause
premature failure of the element which is not
covered by guarantee.

EC Declaration of Conformity
We declare that the units: LMB conform to: 73/23/EEC, BSEN60335-2-15 & 89/336/EEC, EN55014-1, 
EN55014-2, EN61000-3-2, EN61000-3-3.

Tim Hopper -Technical Director

Earlex Limited,

Moorfield Road, Slyfield Industrial Estate, Guildford, Surrey GU1 1RU. UK.

Tel: 01483 454666   Fax: 01483 454548  Email: [email protected]

Website: www.earlex.co.uk

© Earlex Ltd. 2004

PS0057  03/04

Summary of Contents for Steam Master LMB110V









Reviews: