Eagletone EP-100 Series, User Manual

Page: 36 / 56

MASTER VOLUME
a.
Use this sliding control button to adjust the overall volume of
the keyboard.
SONG VOLUME
b.
Slide this controller to adjust the volume of the builtin play
along songs, the keyboard instrument voice will not be
affected.
DEMO
c.
Press the DEMO button. The first demo song will play back
instantly. This piano has 12 different demonstration songs.
To access an individual demo song press the
+/YES
or
–/
NO buttons when the Demo Feature is engaged. The Demo
Songs will continue to play consecutively until the DEMO
button or the u PLAY/ p STOP button is
pressed.
METRONOME
d.
Press the METRONOME button to engage the built-in
metronome. Use the +/YES and –/ NO buttons when the
metronome is engaged to choose the meter of your choice,
2/4, 3/4, 4/4 or 5/4 time.
TEMPO
e.
Press one of the TEMPO buttons, the current tempo value
will appear on the display. You can use the
TEMPO +
,
TEMPO
–
buttons, or the
+/YES
and
–/NO
buttons to change the
tempo value range from 40 to 240 bpm (beats per minute).
Press the TEMPO + or TEMPO – buttons simultaneously to
recall the default tempo setting. After three seconds the
display will revert to the selected voice.
> NOTE: There is a four-dot beat indicator above the tempo
buttons. It indicates the tempo and beat for the accompa-
niment that is playing.
INSTRUMENT VOICE SELECTION BUTTONS
f.
There are 10 instrument voices buttons and 30 instrument
voices. You can instantly select an instrument voice by
pressing one of the instrument voice selection buttons. You
can select the variation of the engaged voice by pressing the
variation button. There is a total of 3 instrument voices per
instrument voice button. There is a complete list of all 30
voices listed in the back of the manual.
Please see the Voice section of this manual for more informa-
tion.
VARIATION
g.
This button selects the variation of the initial instrument
voice button sound. Pressing the
VARIATION
button one
time turns the button leD red while pressing the button
a second time turns the button leD green. Pressing the
button a third time turns the button leD off. Red leD
denotes the first variation of the initial voice selection.
green leD denotes the second variation of the initial voice
selection. When the leD is off the initial voice selection is
heard.
FUNCTION
h.
The
FUNCTION
button is used to access the Function
menu. The Function menu can be used to adjust or change
the parameters of a number of settings. The reverb level,
chorus level, touch, split point, tuning etc. are all set from
the Function menu.
Please see the Function section of this manual for more infor-
mation.
PAGE
i.
H et PAGE G
The
PAGE H
et
PAGE G
buttons (up and down) are used to
access the different menus in the Function feature. When
the FUNCTION button has been pressed, use the PAGE H et
PAGE G buttons to access the Function menu selections.
USER REG
j.
Registration is used to store keyboard settings. Press the
USER REG button to engage the registration memory mode.
There are two keyboard memory settings.
see the Registration section of this manual for more information.
ENTER KEYS
k.
Use the +/YES, –/NO buttons directly while using the voice
or function settings. These buttons are also used to access
or alter many of the function features or when input is
necessary.
REVERB
l.
The reverb effect is engaged automatically when the power
is turned on. Reverb simulates the effect of playing in a big
room or hall where the sound reverberates off the walls
and ceiling. Press the
REVERB
button to turn off the reverb
effect. You can switch the reverb feature on and off by
pressing the REVERB button. Reverb depth can be changed
in the Function menu.
Please see the Function section for more information.
MAX
DEMO METRONOME – TEMPO +
HIGH
MIN
LOW
SONG VOLUME
MASTER VOLUME
PANEL CONTROLS
eAgleTone DIgITAl PIAno eP-100 Serie II User manual english
9
U
PANEL CONTROLS