manualshive.com logo in svg

Eagle FishElite 320, Installation And Operation Instructions Manual

The Eagle FishElite 320 is a premium fishfinder designed to excel in any fishing environment. With its intuitive controls and advanced features, this device gives you a competitive edge. For detailed installation and operation instructions, download the manual for free from our website.

Share
Download
background image

iv

Edit a Waypoint (Name, Symbol, and Position) .................. 131
Selecting a Waypoint ............................................................ 132
Set a Waypoint By Average Position ................................... 132
Set a Waypoint By Projecting a Position ............................. 132

Section 8: System & GPS Setup Options

..........................

135

Alarms ....................................................................................... 135
Auto Satellite Search ................................................................ 136
Check MMC Files and Storage Space ...................................... 137
Communications Port Configuration (320DF only) ................ 137
Configure DGPS (320DF only) ................................................. 138
Configure NMEA (320DF only)................................................ 139
Coordinate System Selection.................................................... 139
Map Fix ..................................................................................... 141
Customize Page Displays ......................................................... 142
DGPS Status (320DF only)....................................................... 142
GPS Simulator .......................................................................... 142
Hide GPS Features ................................................................... 144
Initialize GPS............................................................................ 144
Map Auto Zoom ......................................................................... 145
Map Data................................................................................... 145

Show Map Data..................................................................... 145
Pop-Up Map Info ................................................................... 145
Map Boundaries .................................................................... 146
Fill Land Gray....................................................................... 146
Map Overlays (Range Rings; Lat/Long Grid) ...................... 146

Map Datum Selection ............................................................... 146
Map Detail Category Selection................................................. 147
Map Orientation ....................................................................... 148
Navionics

 Charts..................................................................... 149

Pop-Up Help .............................................................................. 154
Position Pinning........................................................................ 155
Reset Options ............................................................................ 155
Require DGPS (320DF only) .................................................... 156
Screen Contrast and Brightness .............................................. 156
Set Language ............................................................................ 157
Set Local Time .......................................................................... 158
Show Waas Alarm..................................................................... 158
Software Version Information.................................................. 159
Sounds and Alarm Sound Styles.............................................. 159
Track Smoothing....................................................................... 160
Trail Options ............................................................................. 160
Units of Measure....................................................................... 163

Summary of Contents for FishElite 320









































































































































































































Reviews:

No comments

Related manuals for FishElite 320

Marport NBTE V1 User Manual preview
NBTE V1
Brand: Marport Pages: 64
Chinavision CVXR-OG34 Operation Manual preview
CVXR-OG34
Brand: Chinavision Pages: 4

Brands by name

Popular brands

Load more brands