manualshive.com logo in svg

Eagle FishElite 320, Installation And Operation Instructions Manual

The Eagle FishElite 320 is a premium fishfinder designed to excel in any fishing environment. With its intuitive controls and advanced features, this device gives you a competitive edge. For detailed installation and operation instructions, download the manual for free from our website.

Share
Download
background image

178

down to the lower selection list by pressing 

ENT

, then press 

↓

 or 

↑

 to

select a waypoint from the list, then press 

ENT

. The waypoint informa-

tion screen appears.

 

 

Find By Name menu, left. Waypoint Information screen, center. At right,

the found waypoint is highlighted by the cursor on the Map Page.

A. 

To navigate

 to the waypoint, press 

ENT

. (Go To Waypoint com-

mand is already highlighted.) The unit will show navigation infor-
mation to the waypoint.

B. 

To find

 the waypoint, press 

↓

 to 

F

IND

|

ENT

. The Map Page ap-

pears with the cursor highlighting the found waypoint.

Summary of Contents for FishElite 320









































































































































































































Reviews:

No comments

Related manuals for FishElite 320

Marcum Technologies Showdown 5.6 Dual Beam User Manual preview
Showdown 5.6 Dual Beam
Brand: Marcum Technologies Pages: 16
Raymarine CP200 Installation Instructions Manual preview
CP200
Brand: Raymarine Pages: 47

Brands by name

Popular brands

Load more brands