manualshive.com logo in svg

Eagle FishElite 320, Installation And Operation Instructions Manual

The Eagle FishElite 320 is a premium fishfinder designed to excel in any fishing environment. With its intuitive controls and advanced features, this device gives you a competitive edge. For detailed installation and operation instructions, download the manual for free from our website.

Share
Download
background image

24

NOTE:

Periodically wash the transducer's face with soap and water to re-
move any oil film. Oil and dirt on the face will reduce the sensitivity
or may even prevent operation.

SHOOT-THRU-HULL PREPARATION

The transducer installation inside a fiberglass hull must be in an area
that does not have air bubbles in the resin or separated fiberglass lay-
ers. The sonar signal must pass through solid fiberglass. A successful
transducer installation can be made on hulls with flotation materials
(such as plywood, balsa wood or foam) between layers of fiberglass if
the material is removed from the chosen area.

Epoxy the transducer to a solid portion of the hull.

For example, some (but not all) manufacturers use a layer of fiberglass,
then a core of balsa wood, finishing with an outer layer of fiberglass.
Removing the inner layer of fiberglass and the balsa wood core exposes
the outer layer of fiberglass. The transducer can then be epoxied di-
rectly to the outer layer of fiberglass. After the epoxy cures, the hull is
watertight and structurally sound. Remember, the sonar signal must
pass through solid fiberglass. Any air bubbles in the fiberglass or the
epoxy will reduce or eliminate the sonar signals.

WARNING:

Do not remove any material from your inner hull unless
you know the hull's composition. Careless grinding or
cutting on your hull can result in damage that could sink
your boat. Contact your boat dealer or manufacturer to
confirm your hull specifications.

To choose the proper location for thru-hull mounting, anchor the boat in
60 feet of water. Add a little water to the sump of the boat. Plug the
transducer into the sonar unit, turn it on, then hold the transducer over
the side of the boat. Adjust the sensitivity and range controls until a sec-
ond bottom echo is seen on the display. (You will need to turn off both
automatic and ASP

.) Don't touch the controls once they've been set.

Fill with epoxy

Inner hull

Epoxy to hull first

Outer hull

Flotation material

Summary of Contents for FishElite 320









































































































































































































Reviews:

No comments

Related manuals for FishElite 320

Lowrance HOOK2 Manual preview
HOOK2
Brand: Lowrance Pages: 4
Humminbird 700059-1 Installation Manual preview
700059-1
Brand: Humminbird Pages: 6
Humminbird 748 3D Operation Manual preview
748 3D
Brand: Humminbird Pages: 81
Raymarine DS600X Owner'S Handbook Manual preview
DS600X
Brand: Raymarine Pages: 84

Brands by name

Popular brands

Load more brands