manualshive.com logo in svg

Eagle FishElite 320, Installation And Operation Instructions Manual

The Eagle FishElite 320 is a premium fishfinder designed to excel in any fishing environment. With its intuitive controls and advanced features, this device gives you a competitive edge. For detailed installation and operation instructions, download the manual for free from our website.

Share
Download
background image

96

The Satellite Status Page has its own menu, which is used for setting
various options. (Options and setup are discussed in Sec. 8). To access
the Satellite Status Page Menu, from the Status Page, press 

MENU

.

Navigation Page

This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page: Press 

PAGES

| 

→

 or 

←

 to 

N

AVIGATION

|

EXIT

.

The navigation screen looks like the one below when you're 

not

 navi-

gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history, or
path you've just taken, is depicted by the line extending from the arrow.
The arrow pointing down at the top of the compass rose indicates the cur-
rent track (direction of travel) you are taking.

Navigation Page, recording a trail, traveling southwest. Page looks

like this when the unit is not navigating to a waypoint , following a

route, or backtracking a trail.

When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint, and course are all shown digitally on this screen.

NOTE:

Remember, when the Speed, Track and Position information dis-
plays are flashing, satellite lock has not been achieved and no posi-
tion fix has been determined. A question mark will also flash on the
present position arrow in the center of the compass rose.

Speed (ground speed) is the velocity you are making over the ground. (If

Compass

rose

Navigation
information
displays

Present

position

arrow

Trail line

Track or compass heading indicator, showing direction of travel

Summary of Contents for FishElite 320









































































































































































































Reviews:

No comments

Related manuals for FishElite 320

Servco (TL58 Operation Manual preview
(TL58
Brand: Servco Pages: 2
deeper START Manual preview
START
Brand: deeper Pages: 99
Garmin STRIKER PLUS 5 Quick Start Manual preview
STRIKER PLUS 5
Brand: Garmin Pages: 2
FishHunter MILITARY User Manual preview
MILITARY
Brand: FishHunter Pages: 30
Hobie Kit III Instruction Manual preview
Kit III
Brand: Hobie Pages: 10
Humminbird 530508-3_A User Manual preview
530508-3_A
Brand: Humminbird Pages: 4
Humminbird 530501-1_B User Manual preview
530501-1_B
Brand: Humminbird Pages: 4
Humminbird 727 Accessories Manual preview
727
Brand: Humminbird Pages: 60
Humminbird 595C Operation Manual preview
595C
Brand: Humminbird Pages: 41
Humminbird 400TX Operation Manual preview
400TX
Brand: Humminbird Pages: 35
Humminbird 425 SX Operation Manual preview
425 SX
Brand: Humminbird Pages: 36
Humminbird 718 Operation Manual preview
718
Brand: Humminbird Pages: 110
Humminbird 300TX Operation Manual preview
300TX
Brand: Humminbird Pages: 28
Humminbird 541 Operation Manual preview
541
Brand: Humminbird Pages: 84
Humminbird 350TX 350TX Operation Manual preview
350TX 350TX
Brand: Humminbird Pages: 36
Humminbird 581i Combo Operation Manual preview
581i Combo
Brand: Humminbird Pages: 109
Humminbird 150SX Operation Manual preview
150SX
Brand: Humminbird Pages: 36
Humminbird 343C Operation Manual preview
343C
Brand: Humminbird Pages: 36

Brands by name

Popular brands

Load more brands