background image

91

Pages Menu, showing Map display options.

Sonar Page

The Sonar Page displays the sonar chart, a view of the water column
from the surface to the bottom. The chart scrolls across the screen from
right to left, displaying signal echoes that represent fish, structure and
the bottom. The Sonar Page is discussed in detail in Sec. 3. To get to
the Sonar Page press 

PAGES

|

 to 

S

ONAR

|

EXIT

.

Satellite Status Page

The Satellite Status GPS Page provides detailed information on the
status of the Cuda's satellite lock-on and position acquisition. To get to
the Satellite Status Page press 

PAGES

|

 

to Map|

 to 

S

ATELLITES

|

EXIT

.

No matter what Page display you are on, a flashing current position
indicator/question mark symbol and flashing GPS data displays indi-
cate satellite lock has been lost and no position has been acquired. The
Satellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.

WARNING:

Do not begin navigating with this unit until the numbers
have stopped flashing!

Summary of Contents for CUDA 250 S/Map













































































































































































Reviews: