Eagle CUDA 250 S/Map Installation And Operation Instructions Manual Download | Manualshive

Page: 167 / 172

background image

159

EAGLE DATABASES LICENSE AGREEMENT

THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST PUR-
CHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL, FAMILY, OR
HOUSEHOLD USE ("YOU") AND EAGLE ELECTRONICS, A DIVISION OF LEI, THE
MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US"). USING THE PROD-
UCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES ACCEP-
TANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT ACCEPT ALL TERMS
AND CONDITIONS, PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PUR-
CHASE. PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL AND IN-
CLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE NUMBER. YOUR
PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED. PLEASE
ALLOW 4-6 WEEKS TO PROCESS YOUR REFUND.

1.

This License Agreement applies to the one or more databases that your product may
contain. We refer to these singly as a "Database" and together as the "Databases."
Your product may thus include the "WBS Database" which contains worldwide back-
ground surface mapping data, the "SmartMap Database" which contains inland map-
ping data, or other Databases.

2. The Databases that your product may contain are licensed, not sold. We grant to you

the nonexclusive, nonassignable right to use these Databases for supplemental naviga-
tion reference purposes, but only as long as you comply with the terms and conditions of
this License Agreement. We reserve the right to terminate this license if you violate any
aspect of this License Agreement. You are responsible for using official government
charts and prudent navigation for safe travel.

3. The Databases housed in your product are protected by the copyright notices ap-

pearing on the product or its screen(s). You may NOT modify, adapt, translate, re-
verse engineer, decompile, disassemble, rent, lease, or resell any Database, and you
may NOT create derivative works based upon any Database or its contents.. Any un-
authorized reproduction, use, or transfer of a Database may be a crime and may sub-
ject you to damages and attorney fees.

4. This License Agreement will terminate immediately without prior notice from us if

you fail to comply with or violate any of the provisions of this Agreement. Upon ter-
mination, you will promptly return all products containing one or more Databases to
us.

5. Prices and programs are subject to change without notice.
6. This License Agreement shall be governed by the laws of the State of Oklahoma and

comprises the complete and exclusive understanding between you and us concerning
the above subject matter.

«
...
165
166
167
168
169
...
»

Summary of Contents for CUDA 250 S/Map













































































































































































Reviews:

No comments

Related manuals for CUDA 250 S/Map

RoadMate Series

Brand: Magellan Pages: 14

RoadMate 1440 - Automotive GPS Receiver

Brand: Magellan Pages: 19

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 31

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 33

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 8

Brand: Navman Pages: 37

Brand: Navman Pages: 64

Brand: Navitel Pages: 21

Brand: e2Link Pages: 20

A4BVGB01 Series

Brand: Garmin Pages: 22

ACT IFITTRACKERB.0

Brand: iFIT Pages: 4

Brand: TBIT Pages: 3

Brand: Navman Pages: 2

Brand: Memory-map Pages: 66

Brand: AllBe Solutions Pages: 25

Brand: NAVTELECOM Pages: 36

Brand: Queclink Pages: 15

Brand: Garmin Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands