Eagle 715RS, Operation Manual

Page: 6 / 38

- 6 -
1. Safety & Warnings
1.7 During Operation
•
The weight of the package cannot exceed 70kg. For package weight over 25kg, it may be
necessary to use lifting aids for handling; while package weight over 40kg, it's necessary to
handle it with conveyor system.
•
The size of the package should not be less than 70 mm × 20 mm (2.75 inches
×
0.75 inches).
•
While running, check the unit for any unusual sounds or smoke emissions.
•
Keep away from the inside of the arch while the machine is operating; do not put your hands or
body into the arch when the machine is running.
IT IS NORMAL FOR THE HEATER TOUNGE TO SMOKE DURING THE
SEALING OPERATION
1.8 After Operation
•
Remove dust and dirt from the unit; pay particular attention to the interior of the arch.
•
Turn off the power when the machine is not in use.
1.9 Signs & Symbols
Warning! Dangerous Voltages!
Contact with live electrical parts will result in
serious injury or death.
Warning! Hot Surface!
Welding area is approximately 270ºC (520ºF)!
Allow sufficient time for the heater to cool down
before performing any work in the welding area.
Warning!
Do not put your hands or any part of your body
into the arch working area while the machine is
in operation.