background image

 

Copyright © 2003-2005 Eagle Tree Systems, LLC 

 

 

Page 22 

 

The Software included with the Flight Data Recorder.   See the Software license agreement for more 
information on Software restrictions. 

 

Problems that result from:  

o

 

External causes such as accident, abuse, misuse, or problems with electrical power  

o

 

Servicing not authorized by us  

o

 

Usage that is not in accordance with product instructions  

o

 

Failure to follow the product instructions  

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 
FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND 
DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY 
STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, 
ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD AS DESCRIBED ABOVE. NO 
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS 
EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS 
LIMITATION MAY NOT APPLY TO YOU.  

WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR 
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST 
DATA OR LOST SOFTWARE. OUR LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT 
THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM AMOUNT FOR WHICH WE ARE RESPONSIBLE.  

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  

 

Product Warranty Registration 
 

Registering your product means that we can send you important updates and other notifications.  Please fill out this form (or a copy) 
and mail or fax it to Eagle Tree Systems.   Or, email the info to 

[email protected]

.   Note that if you purchased your item 

directly from Eagle Tree Systems, this is not necessary. 

 

 

 

Eagle Tree Systems Warranty Product Registration: 
 
Name:__________________________________________________________________________ 
 
Address: ________________________________________________________________________ 
 
Phone: ________________________________  Email: ___________________________________  
 
Product(s) Purchased: ________________________     Date Purchased:______________________ 
 
Where did you purchase your product?_________________________________________________ 
 
Where did you hear about our product? _______________________________________________ 
 
Any features or additions you would like to see? _________________________________________ 

 

Summary of Contents for Seagull Glide























Reviews: