background image

SAVE THESE INSTRUCTIONS

WARNING: 

Rotating fan blades inside the cover. Before opening cover, switch off machine.Wait until the fan/brush

stops completely or dust and debris may be ejected.

WARNING: 

Electrocution could occur if you handle the plug or appliance with wet hands. Do not handle plug or

appliance with wet hands.

WARNING: 

Damage could occur to machine if openings are blocked. Do not put any object into openings. Do not use

with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

WARNING: 

If the machine is 

not working properly

, has been dropped, damaged, left outdoors, or dropped into water,

return it to an Authorized service center.

WARNING: 

Injury to the operator and/or damage to the machine could occur when cleaning on stairs, unless extra

caution is used. Use extra caution when cleaning on stairs.

WARNING: 

To reduce the risk of electrical shock, always use a 3-wire electrical system connected to the electrical

ground. Whenever possible connect the machine to an outlet protected by a ground fault interrupter (GFCI). See
“Grounding Instructions.”

CAUTION: 

Should extension cords be used, ensure that the cable rating is suitable for use with the equipment. Do not

use the cable coiled as this could result in a voltage drop or overheating. Keep dry at all times.

WARNING: 

Use of this machine to move other objects or to climb on could result in injury to the operator or

damage to the machine. Do not use this machine as a step or furniture. Do not allow to be used as a toy. Close
attention is necessary when used by or near children.

Page 2

WARNING: 

Moving parts of this machine can cause injury and/or damage. Keep hands, feet, loose clothing, hair,

fingers, and all parts of the body away from openings and moving parts.

WARNING: 

Operating a machine without observing all labels, decals, etc., could result in injury or damage. Read

all machine labels before attempting to operate the machine. Make sure all of the labels are attached or fastened to
the machine. Get replacement labels and decals from the manufacturer’s distributor.

WARNING: 

Turn off all controls before unplugging.

WARNING: 

Do not use without dust bag and/or filters in place.

WARNING: 

Do not use outdoors or on wet surfaces. Do not expose to rain. Store indoors.

Summary of Contents for Hospital S6101HQ-S

















Reviews: