WARNING: THE UNIT IS FOR DRY VACUUMING ONLY AND MUST BE
STORED IN A DRY LOCATION
1. Attach paper bag to tank inlet deflector. See Figure 1.
2. Ensure that the cartridge filter is securely attached
to the bottom of the vacuum head. See Figure 2. For
S6101HQ-T units, insert basket filter into the tank.
See Figure 2-A.
3. Place vacuum head onto the tank and secure it with
the two clamps.
4. Insert hose into the tank inlet until it locks in. See Figure 3.
5. Attach appropriate cleaning tool. For optional power
brush attachment, see Power Head and Wand Assembly.
6. Activate the vacuum by pressing the switch on the vacuum head.
SET UP AND OPERATION
AFTER USE
1. Store the cord on the hook.
2. Store the appliance indoors, away from sources of heat.
3. This appliance is provided with an automatically reset
thermal limiter to avoid damage to motor. If thermal
limiter operates do one or more of the following:
•
Change the bag
•
Clean or replace the cartridge filter
•
Check hose and tank inlet for any obstructions
•
Wait a few minutes for the thermal limiter
to re-close the circuit
Page 4
Figure 2-A
Figure 2
Figure 3
Figure 1
Summary of Contents for Hospital S6101HQ-S
Page 5: ...Page 3...
