EAE SW104, Product Manual, Page: 8 / 23

Product Manual SW108 and SW104
EAE KNX Switch Actuator
PM R2.0
©
EAE Technology www.eaetechnology.com Page 7 / 22
4 Parameters
4.1 Main General
General Parameters
Enable manual Operation *yes
no
The switch actuator can be switched on or off with slide switches. This parameter determines the
position of relays can be modified manually or not.
§
Set the parameter to “yes”.
Each relay can be operated manually.
§ Set the parameter to “no”.
It is still possible to change relays position but relay return its old position in a maximum of
16 seconds.
Device alive operation active yes
*
no
This object is used to report that device is still alive and connected the KNX line. Telegram value can
be selected ON/OFF. If a telegram is not received, device may be defective or KNX cable can be
disconnected. If the parameter selected yes;