©
EAE Technology
www.eaetechnology.com
Page 2 / 21
Product Manual MD
100
EAE KNX Motion Detector
MD
100
PM R
1.0
1
General
§
MD100 KNX Motion Detector is ideal for interior rooms such as medium to large-size offices,
corridors, classrooms, conference and meeting rooms, parking buildings, warehouses and
sport halls. Detector is available in two models; flush mounted and surface mounted. Both
models can detect the motion over 9m diameter at installation height of 2.5m.
§
Constant light function can be applied in dependence of presence information thanks to
integrated brightness sensor and movement sensor. MD 100 regulates the ambient
brightness to a defined brightness value.
§
Lighting can be set to different brightness levels with corridor function based on occasions
such as "motion detection, after movement, no action". Stay-on time can be changed the by
end user.
§
Air-conditioning and ventilation systems can be controlled by independent HVAC channel.
§
Presence information can be sent to presence monitoring applications by independent
presence channel.
§
The EAE KNX Presence Detector MD 100 can either used as a standalone device or
masterslave device (parallel operation with other MD 100s) according to necessity of project.
§
MD 100 enables fully-automatic and semi-automatic lighting control.
§
Test and calibration mode allows for easy installation.
§
The device does not require an additional power supply.
NOTE: Device factory default physical address is “15.15.255”.
1.1
Technical Data
Type of protection
IP 20
EN 60 529
Safety class
II
EN 61 140
Power supply :
Voltage
21V… 30V DC, KNX line
Current consumption
< 10 mA
Application Area
Interior rooms
Sensor Type
Passive infrared
Installation
Location
Ceiling
Recommended height
2,5m - 5m
Detection
Diameter (at height of 2,5m)
9m movement detection
