©
EAE Technology
www.eaetechnology.com
Page 19 / 21
Product Manual MD
100
EAE KNX Presence Detector
MD
100
PM R
1.0
This parameter is used to select the behaviour of lighting level control when any telegram is received
via input objects of related lighting group. (Input switch, input dimming level, input dimming light)
Disable constant light and dim: When input telegram is received, constant light level control will be
disabled until re-enabling via “Disable constant light” object of the lighting group and lighting group
will be dimmed.
Don’t disable and no action: Constant light control is not disabled when any input telegram is
received. Lighting group performs the command which is sent by input until to next constant light
level telegram.
3.7
Lighting
Lighting Parameters
Lighting section consists of presence detection parameters which will be used for constant light level
control.
Operation lighting
*automatically ‘ON’ and ‘OFF’
semi-
automatic only ‘OFF’
This parameter is used to select operation type of lighting.
Automatically ‘ON’ and ‘OFF’: Lighting group is controlled automatically by detector according to
presence information. If person is present in the room, “ON” command is sent to the lighting group if
no person is present, “OFF” command is sent to the lighting group.
Semi-automatic only ‘OFF’: Lighting group is controlled semi-automatically according to presence
information. The lighting group waits the “ON” command from user in order to light up, it does not
light up even if a motion is detected. But, “OFF” command is sent automatically by detector if there
is no person in the room.
Switch ‘ON’ delay [min]
*0
…30
This parameter is used to determine “Switch ON delay time”. After a movement detection, sensor
waits until “Switch ON delay time” is expired and sends the presence information to “Presence
output” with a secondary detection.
Stay ‘ON’ time [min]
*1
…120
This parameter is used to determine “Stay ON time” for lighting group. “ON” telegram is sent to the
lighting group with a detected motion and lighting group stays “ON” until “Stay ON time” is expired.
Switch ‘ON’ delay and stay ‘ON’ time can
be changed by bus
*yes
no
This parameter determines whether “Switch ON delay time” and “Stay ON time” can be changed by
bus or not.
