EAE EE-6604V2 .BWF, Installation, Operation, And Parts Manual

Page: 16 / 42

Installation, Operation and Parts Manual
EE-6604 V2.BWF
- 16
Step 7: Fix base frames with expansion bolts.
1. Drill anchor holes for expansion bolts on the ground with an electrical drill. Make sure to drill vertically.
2. Remove thoroughly the debris and dust in holes and ascertain that the posts stay right upon the circle previously marked by chalk.
3. Hammer in and secure expansion bolts.
Step 8: Fix oil hose protection covers.
4.4 Items to be checked after installation.
S/N Check items YES NO
1 Screw torque of expansion bolts : 60 ‐ 80N•m;
2 Rising speed ≥ 20mm/s;
3 Noise with rated load ≤ 75db;
4 Grounding resistance: not bigger than 4 Ω ;
5 Height difference of the two platform ≤ 5mm;
6 Mechanical locks are robust and synchronized when running with rated load ;
7 If the control button works as “hold to run”?
8 If limit switches work well?
9 If grounding wire is connected?
10 If the lift rises and lowers smoothly?
11 If there is no abnormal notice during running with rated load?
12 If there is no oil leakage when running with rated load?
13 If there is no air leakage when running with rated load?
14 If expansion bolts, nuts or circlips are well secured?
15 If max lifting height is 1900mm?
16 If Safety advices, name plate and logos are clear?