Installation, Operation and Parts Manual
EE-6214EKZ
15
Step 8: Install the hydraulic system.
Attention: Do not contaminate the hydraulic system when do the connection.
1. Install hydraulic power unit onto the main post.
2. Connect oil hoses (NO.4 and 5 in the below Fig.) to the “T” connector in the main post.
Don’t let any solid substance go into the hydraulic line.
Ensure the connectors are screwed tight against leakage.
1. Composite connector
2. Rubber oil hose
3.
“T” connector
4. Short oil hose
5. Long oil hose
6. Oil cylinder
7. Hydraulic power unit
1. Hex head nut M10
2.
Spring washer M10
3.
Flat washer M10
4.
Anti-vibration washer
5.
Hex head full swivel screw M10x35
