1260-45 User Manual
EADS North America Defense
Module Specific Syntax 3-1
Test and Services, Inc. © 1993
Chapter 3
MODULE SPECIFIC SYNTAX
Module Specific
Command Syntax
This section contains the command syntax information that is
unique to the 1260-45. A more detailed explanation of the
individual commands is contained in the 1260 Series VXI
Switching Cards Manual, Publication No. 980673.
The Module Specific Syntax for the 1260-45 is required in the use
of the OPEN and CLOSE commands. It will also appear in data
output by the 1260 Series Master in response to the PDATAOUT
command.
Syntax
The Module Specific Syntax for the 1260-45 Quad 4 x 16 Signal
Matrix module is as follows:
<mod addr>.<grp no><row no><col no>
where <mod addr> is the switch card address.
NOTE:
The <mod addr> used here is not the VXIbus defined
logical address of the 1260 Series Master. It is peculiar to
the 1260 Series and describes the switching module in
relation to the 1260 Master. This address corresponds to
the binary value of the switch setting of SW1 on the
switching module PCB.
<grp no> is a reference to the matrix containing the relay to be
switched. It is a single digit number between 0 and 3.
<row no> is the matrix row to be connected. It is a single digit
number between 0 and 3.
<col no> is the matrix column to be connected. It is a two digit
number between 00 and 15.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
