® 16k/8k CXP Color
29
e2v semiconductors SAS 2014
Timers
TimerSelector
Select which timer to be configured
- Timer1,
- Timer2
All the following parameters are relative to the selection of the TimerSelector above
TimerTriggerSource
Select which internal signal will trigger the timer:
0: Off
9: ExposureStart
10: ExposureEnd
11: Line0
12: Line1
13: Line2
16: Counter1End
17: Counter2End
18: Timer1End
19: Timer2End
TimerTriggerActivation
Select the type of signal that will trig the timer:
0: RisingEdge
1: FallingEdge
2: AnyEdge,
3: LevelHigh
4: LevelLow
TimerDelay
Set the delay in µs from the TimerTrigger to the actual Timer pulse output ( (0,31/30MHz, step 1/30MHz)
TimerStatus
Get counter status
0: TimerIdle
1: TimerTriggerWait
2: TimerActive,
3: TimerCompleted
TimerDuration
Set the length of the ouput pulse in µs (0,6553.5, step 0.1)
TimerValue
Return the actual value of the selected timer (0,65535/30MHz, step 1/30MHz)
6.2.5.1
Counters
Here is a following description of the counters :
6.2.5.2
Timers
Here is a following description of the counters :
Counter
CounterDuration
CounterEnd
CounterEventSource
CounterTrigger polarity
Event
Clock
Start /
Reset
Timer
TimerDuration
TimerTrigger Polarity
+ TimerDelay before start
counting
Event
Start /
Reset
Timer
Delay
Timer
Duration
Timer
Delay
Timer
Duration
TimerEnd
TimerActive
TimerEnd
TimerActive
Trigger source
