e2v ELIIXA+, User Manual

Page: 46 / 54

® 16k/8k CXP Color
46
e2v semiconductors SAS 2014
Feature CXP @ Size
in
bytes
Description By default
TestImageSelector 0x08214 4 0:Set test (output FPGA) image pattern to “Off”, processing
chain activated
1: Set test (output FPGA) image pattern to
“GreyHorizontalRamp”, processing chain disabled
2: Set test (output FPGA) image pattern to “White pattern”,
processing chain disabled
3: Set test (output FPGA) image pattern to “gray pattern”,
processing chain disabled
4: Set test (output FPGA) image pattern to “Black pattern”,
processing chain disabled
5: Set test (output FPGA) image pattern to
“GreyVerticalRampMoving”, processing chain disabled 0
InputSource 0x08218 4 0: Set signal source to CMOS sensor, processing chain
activated 0
Color Selection 0x08230 4 Disable color components
Bit 0 : Disable Red color
Bit 1 : Disable Blue color
Bit 2 : Disable Green colors (both Green
Red
and Green
Blue
)
12.3 Synchro and Acquisition modes
Feature CXP @ Size
in
bytes
Description By default
LinePeriod 0x08400 4 Set line period, from from 1 (0,1µs) to 65535 (6553,5µs), step
1 (0,1µs) 500
LinePeriodMin 0x08404 4 Get current line period min (0..65535 step 0,1µs) Depends on Sensor
mode
AcquisitionLineRate Xml = 1 / LinePeriod en Hertz
ExposureTime 0x08408 4 Set exposure time, from 1 (0,1µs) to 65535 (6553,5µs), step 1
(0,1µs) 500
TriggerPreset 0x0840C 4 0: Set trigger preset mode to Free run timed mode, with
exposure time and line period programmable d
1: Set trigger preset mode to Triggered mode with exposure
time settings
2: Set trigger preset mode to Triggered mode with maximum
exposure time
3: Set trigger preset mode to Triggered mode with exposure
time controlled by one signal
4: Set trigger preset mode to Triggered mode with exposure
time controlled by two signals
5: Set trigger preset mode to Freerun mode, with max
exposure time and programmable line period 5
12.4 Scan Direction
Feature CXP @ Size
in
bytes
Description By default
ScanDirectionMode 0x0820C 4 0: Set scan direction to “forward”
1: Set scan direction to “reverse”
2: Set scan direction to “Externally controlled direction via
External Line on I/O Connector (0 : forward, 1 : reverse) 0
ExternalLine
0x08570 4 0: Line0
1: Line1 0