Operate your device
1 - Use
- Connect the adapter to the power cord (1).
- Connect the adapter to the power cord (2).
- Plug the L-shaped connector into the power socket of your device and screw it (3).
- Plug the power cord into the socket (4).
2 - Charging the battery
- Ensure that the battery is fully charged (green light on) before use:
- Turn off the power switch of your window cleaning robot, then connect it to a power source. The orange light
on means that your device is charging.
- The green LED on means that the battery is fully charged.
3 - Install the cleaning rings and the microfiber pads
- Make sure that the cleaning ring is perfectly covered by the microfiber pad and then fix it correctly on the
cleaning wheel to avoid air leaks.
4 - Security
- For windows without a balcony, a warning zone must be provided on the floor to prevent people from
approaching it.
- Check that the safety rope is not broken and that the knot is properly tightened.
- Tie the safety rope and tie it to something high before using your window cleaning robot.
EN
Summary of Contents for EZIclean Hobot 388
Page 3: ...FR ...
