5. Fill the tank.
Fill the water tank with pure water or
from eziclean® cleaning solution to the «MAX» line
and fully tighten the tank cover.
6. Place your robot on the glass.
- Switch on the device. Make sure the fan is running.
- Place your device on the glass and keep it 10 cm from the edge.
- Check that the robot sticks to the glass before releasing it.
7. Cleaning with automatic mode and manual mode
- Press or or , your robot automatically cleans the entire window.
- Press to stop your device.
- Press or or or to manually control the direction of movement of your robot.
7. Finish cleaning and remove your device from the glass.
(1) Hold the lifeline with one hand and grasp your device firmly with the other hand to remove it from the glass.
(2) Turn off your device once you have placed it on a table or secure surface.
UPS (Uninterruptible Power Supply)
- The backup battery powers your device for 20 minutes
in the event of a power failure.
- Your device will stop automatically, beep an alert
and will flash red and blue.
- Remove your robot from the glass as soon as possible.
EN
Summary of Contents for EZIclean Hobot 388
Page 3: ...FR ...
