background image

Page 21 

 

ETON AMERICA, LLC. 

LIMITED VEHICLE WARRANTY 

 

Scheduled maintenance service is the responsibility of the owner during and after the warranty 
period. In the event of a failure or required repair, the owner should take vehicle to an 
authorized dealer for repair without undue delay and within a maximum of thirty, (30), days of 
the occurrence of the problem. All eligible warranty repairs must be made at any authorized 
dealer’s normal place of business. Any transportation costs, or other expenses which may 
occur in order to obtain warranty service, are the responsibility of the owner. All eligible 
repairs covered under this warranty will be paid to the servicing dealer only, by ETON 
America, and no additional payments shall be made for authorized warranty repairs. 
 
Dealer and/or ETON America are not responsible for loss of use, other damage or 
inconvenience due to warranty repairs. It is the customer/buyer’s responsibility to review with 
the selling dealer the pre-delivery service schedule to assure machine is properly serviced prior 
to delivery acceptance. It is recommended that the buyer take a test ride to familiarize 
themselves with the machine and to make certain the unit is in proper operating condition. The 
dealer is responsible for checking and performing all items on the “set-up and pre-delivery 
checklist” prior to delivery to the customer. 
 
This warranty is valid at any authorized ETON Dealer in the United States only. In the event 
you experience any problem obtaining prompt service, contact ETON America, customer 
service department for assistance. Always consult first with your selling dealer and/or service 
personnel for assistance with any service work or repairs. In the event you have a problem 
obtaining service send your name, address, and vehicle identification number to Eton America 
for assistance.  
 
The above stated policy is the only policy offered and backed by ETON America, and no other 
organization or individual is authorized to make or offer any different arrangements. Some 
states prohibit certain limitations or conditions or do not allow exclusions or limitations. You 
may be eligible for additional consideration, so check with your local dealer or appropriate 
state agency for assistance. Rights vary from state to state, and you may have other rights not 
offered in this warranty.  
 
ETON America warrants all new vehicles comply with applicable US regulations. 

Summary of Contents for Viper 40E (RXL-40E)

























Reviews: