E-TEN X500 PLUS, Manual

Page: 65 / 248

Using the Phone 4-5
Adjusting the Phone Volume
Tap on the top and adjust all
programs’ sound functions under
. Adjust the phone sound volume
under .
1.
When there is no call, you can push
the volume control key on the
side of the Pocket PC or use the
stylus to tap the speaker icon
Tap
and then to adjust
the ring volume of the incoming
call.
2.
Push the volume control key on the
side of the Pocket PC or tap
and then to adjust the phone
volume. You can only do this
during a call.
3.
Vibration mode: The speaker icon on the top changes to .
4.
Mute mode: The speaker icon on the top changes to .
Here is how to adjust the proper volume:
1.
If earphones are used with the Pocket PC to make calls, set the volume
according to actual personal needs.
2.
If earphones are not used with the Pocket PC and not held close to the ear
for calls but similar to hands-free operation, it is recommended to set the
sound volume for the top two levels.
3.
For holding the Pocket PC close to the ear directly for calls, it is
recommended that you set the volume to the lower four levels. It is
recommended not to use the top two levels because the volume is high and
may affect your hearing.
Turn on or turn off the speakerphone:
1.
Enable the speakerphone: While answering a call, tap Speaker on to turn
on.
2.
Disable the speakerphone: Tap Speaker off to turn off.