E-TEN X500 PLUS, Manual

Page: 18 / 248

1-6
3.
Please connect one side of the AC adapter plug to any household power
outlet and connect the other side of plug from the AC adapter to the USB
port. The Pocket PC will start to charge automatically.
4.
Cold Boot: Press and hold the “Power Button” with one hand, and use the
stylus tip to press the “Reset Button” with the other hand. Release the
“Power Button” and the “Reset Button” at the same time. Wait for the
Pocket PC to restart and follow the instructions on the screen to complete
screen alignment.
5.
It will take about 8 hours to fully charge the battery after the first time you
open the package. Subsequent charging will only take about 3 hours. After
charging, you can disconnect the AC adapter and carry the Pocket PC
around portably. To maintain smooth operation, charge the power
regularly.
6.
View the battery icon on the upper right corner to check the power
usage condition.
7.
The LED indicator on the upper right of Pocket PC will display the
charging and function usage status.
Charging Fully charged Insufficient power
Red LED lights up Red LED goes off
Green LED lights up
Red LED flashes
Phone is on Caution or Warning
Green LED flashes Orange LED flashes
8.
The LED indicator on the upper left of Pocket PC
WLAN Active Bluetooth Active GPS Active
Orange LED flashes Blue LED blinks once
every 4 seconds
Blue LED blinks twice
every 4 seconds