e-Shock GYROCAH, Instructions Manual

Page: 9 / 9

The specifications on this document are subject to change at E-Shock decision.
E-Shock assumes no responsibility for any claims or damages arising out of the use
of this document, or from the use of modules based on this document, including but not limited
to claims or damages based on infringement of patents, copyrights or other intellectual property rights.
For info and sale contact:
info@e-shock.it
E-Shock srl, Milano, Italy
ID 200h - Bit Layout and signal description (sent by ECU to E-LEAN)
Byte Number
0 1 2 3 3 5 6 7
-- -- -- -- -- 0x00 Speed_MSB Speed_LSB
Speed[UNIT] = Speed[km/h]*4;
PINOUT:

DATA CONNECTOR (On Request - BINDER 709 SERIES 4 POLES FEMALE
–
Cod. 09-9792-30-04):
o
PIN1
– BLU- GND
o
PIN2
– RED- 12V
o
PIN3
– YELLOW – CANL
o
PIN4
– GREEN – CANH

VIDEO CONNECTOR
– Customizable on request