E-Mu X board25 Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 61

background image

Introduction

E-MU Systems

12

1. Click

Start

->

Settings

->

Control Panel

.

2. Double-click the

Add/Remove Programs

icon.

3. Click the

Install/Uninstall

tab (or

Change or Remove Programs

button).

4. Select the

E-MU X Board

entry and then click the

Change/Remove

button.

5. In the

InstallShield Wizard

dialog box, select the

Remove ALL

option.

6. Click the

Yes

button.

7. Restart your computer when prompted.

8. You may now re-install existing or updated E-MU device drivers or applica-

tions.

Note About Windows Logo Testing

When you install the X Board USB drivers, you will see a dialog box that informs
you that the driver has not passed Windows Logo testing.

However, the X Board USB drivers have been rigorously tested using the same test
procedures that a signed driver requires, and it passes in all important categories,
including those that measure the relative stability of the driver. So, it is perfectly
safe to install these drivers on your computer.

Troubleshooting

Lost Communication

Should you loose MIDI communication between your X Board and an audio appli-
cation (Cubase, Sonar, etc) or the X Board Editor, the X Board drivers may need to
be re-selected in your application.

1. Go to your application's MIDI I/O settings, de-select the X Board for both

MIDI input and output (or select a different MIDI device).

2. Apply these changes and exit the dialog.

3. Re-enter the application's MIDI settings and re-select the X Board drivers. If this

does not work, the application may need to be restarted.

Wrong Driver in Windows XP or Windows 2000

You may encounter a situation where the X Board Control Editor or Proteus X LE
programs are not running properly, even though the MIDI device itself seems to be
working fine.

If this is the case, you may be in a situation where the Microsoft USB MIDI driver is
running, rather than the E-MU USB MIDI Driver. This may happen if you add a
USB Hub, or if you plug the X Board keyboard into a different USB port than the
one it was plugged into when you installed the X Board software.

«
...
10
11
12
13
14
...
»

Summary of Contents for X board25






























































Reviews:

No comments

Related manuals for X board25

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: 3M Pages: 2

Brand: Keithley Pages: 42

Brand: Tate Pages: 7

Brand: Tate Pages: 5

BioHarmonex BH4

Brand: Calivita Pages: 38

Brand: CAIRE Pages: 91

Brand: Baoding Longer Precision Pump Pages: 6

Brand: Jacobsen Pages: 20

Brand: Mangar International Pages: 8

Brand: Malvern Instruments Pages: 30

Brand: zarges Pages: 36

Brand: Parkside Pages: 95

Brand: Balanced Body Pages: 4

Brand: Balanced Body Pages: 2

Reformer Trapeze Combination

Brand: Balanced Body Pages: 164

Brand: Wacker Neuson Pages: 50

Brand: Balanced Body Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands