E-MU X Board Control
X Board
37
When programmed as a pitch wheel, the screen wheel jumps back to the center
setting when released, just like its counterpart on the X Board. You can pre-set the
initial setting of the Pitch Wheel by typing a number into the value field.
If a number from 0-127 is entered in the CC fields, the wheel becomes an ordinary
continuous controller and the screen wheel no longer jumps back to the center
position when released.
The MIDI Channel field allows you to set the MIDI channel for the pitch wheel.
This field is unavailable unless the “MIDI Channel Number Per Control” option is
selected.
(See page 35.)
Note that it is possible using this control, to set the pitch
wheel to a MIDI channel other than the one the keyboard is using.
Mod Wheel Settings
The modulation wheel settings are program-
mable just like the other controller knobs with
an initial setting, CC number and MIDI channel.
The MIDI Channel field allows you to set the
MIDI channel for the mod wheel. This field is
unavailable unless the “MIDI Channel Number
Per Control” option is selected.
(See page 35.)
You will normally leave the Mod Wheel set to it’s
default setting of CC 1, since this is a standard function on every MIDI synthesizer.
Pedal/Footswitch Settings
The Control Pedal input accepts either a
momentary-on footswitch or a continuously
variable pedal. Like the other controllers, an
initial setting, CC number and MIDI channel can
be programmed. The MIDI Channel field allows
you to set the MIDI channel for the mod wheel.
This field is unavailable unless the “MIDI
Channel Number Per Control” option is
selected.
(See page 35.)
The default setting for the Control Pedal is CC 64, which is
the standard MIDI sustain pedal number.
Octave / Semitone Transpose Settings
These settings allow you to transpose the keyboard
up or down in octave or semitone steps. The octave
transpose range is ±4 octaves. The semitone transpo-
sition range is -64 to +63 semitones.
MIDI Channel
CC Channel No.
Initial Wheel
Setting
MIDI Channel
CC Channel No.
Initial
Pedal Setting
Summary of Contents for X board25
Page 1: ...X Board 1 Owner s Manual ...
Page 58: ...Appendix E MU Systems 58 ...
