E-Mu ProteusX, Operation Manual

Page: 91 / 188

6 - Voice Editor / Synthesizer Level
Voice Effect Sends
E-MU Systems 91
Voice Effect Sends
Each voice has one Main Output level control which feeds a Wet/Dry mixer, and three
Aux Send level controls. The Wet/Dry outputs from all voices in the preset are summed
into the Preset FX. The output of the Preset FX section can be mixed into the Main and
Aux 1-3 outputs. The Main Output of the Preset FX goes directly to the channel’s main
stereo output. The Aux Outputs of the Preset FX are summed together with the Aux
Output signals from all the voices.
All the Aux Sends 1-3 from all voices and channels are summed with Aux Outputs 1-3
from the Preset FX and then feed the Aux FX processors located on the Multisetup page.
See page 55. The outputs of the Aux FX processors (which may be bypassed) feed the
Aux Output section, where they can be directed to any available ASIO output.
The Aux Output On/Off button to the right of each channel main output allows you to
turn the Aux Sends on or off for that channel so you can hear the channel with or
without effects.
The Voice Effect Send levels and the Wet/Dry mix can be controlled using the voice
modulation cords.
See “Send Aux 1-3” on page 94.
See also “Controlling the Preset Effect Amount from the Voice” on page 109.
Voices
per
VOICE
per PRESET
Aux 1
Main
Wet/Dry
Aux 2
Aux 3
Main
Main
Aux 1
Aux Outputs
Aux 2
Aux 3
Aux 1
Aux 2
Aux 3
FX
FX
FX
FX A wet
dry
per MULTI
Aux
On/Off
Post FX
Sends
FX B
ASIO 1/2
ASIO 1/2
ASIO 3/4
ASIO 31/32
ASIO 1/2
ASIO 3/4
ASIO 31/32
ASIO 1/2
ASIO 3/4
ASIO 31/32