E-Mu ProteusX, Operation Manual

Page: 102 / 188

7 - Effects
Programming Effects
102 Proteus X Operation Manual
Programming Effects
Adding an Aux Effect in the Multisetup
f
PatchMix DSP
hardware effects routings
are already programmed
into most Proteus X banks
Some banks (Proteus X Composer, for example) are already programmed to use Proteus
X soft effects.
These instructions explain how to add Aux Effects to a Proteus X bank
which does not already have soft effects programmed.
The Aux Effects are designed to be used as sidechain effects applied on all presets in the
bank. See the diagram on
page 104 for a complete description of the effects routing.
How to Add an Aux Effect
1.
Select the Proteus X Studio session in PatchMix DSP.
2.
Close PatchMix DSP
3.
Select the M ultisetup Page by clicking the Proteus X icon at the top of the tree.
4.
Locate the Aux Outputs section in the lower right part of the window and set all the
Aux Outputs to EX Main . (This bypasses the PatchMix DSP hardware effects and sets
up the Aux Outs to be used as sidechain effects.)
5.
Click on the A ux 1 button at the top right of the screen if it’s not already selected.
The Aux 1 effect appears in the TV screen.
6.
Click on the Effect Select Icon at the top right corner of the Effects TV screen. A
list of available effects drops down.
7.
Select one of the Effects from the list.
E When creating your
own presets and banks,
we recommend you
follow the FX routing
model on
page 108 .
8.
Turn up the FXA knob in the MIDI controllers section to hear the effect.
(FXA is usually located on Controller N .)
9.
Change the effect parameters to suit your own taste, or change the entire effect for
that matter. Keep in mind that the changes you make will affect ALL the presets in
the bank.
Proteus X icon
Effect Select icon