![background image](http://html1.mh-extra.com/html/e-mu/proteusx/proteusx_operation-manual_3118433094.webp)
6 - Voice Editor / Synthesizer Level
Modulation Cords
94
Proteus X Operation Manual
Modulation Destinations
Destination
Description
Key Sustain
Holds the envelope generators at the sustain point as long as this value is above zero.
Fine Pitch
Fine pitch modulation with a maximum range of 1 semitone.
Pitch
Full range pitch modulation.
Glide
Controls the portamento (glide) time.
Chorus Amount
Controls the amount of voice chorus (doubling).
Chorus Position ITD
Controls the Inter-aural Time Delay of voice chorus.
Sample Start
Controls the sample start offset point.
Sample Loop
Controls the sample loop length.
Sample Retrigger
A negative-going, zero-crossing value retriggers the sample from the sample start.
Filter Frequency
Controls the frequency (or morph) of the filter.
Realtime Resonance
Realtime control of filter resonance (Q, gain, body size).
‘Filter Resonance
Filter resonance control which is set at note-on time only.
Amp Volume
Controls the volume of the voice.
Amp Pan
Controls the left/right positioning of the voice.
Amp Crossfade
Controls the RT crossfade of voices so programmed.
Send Main
Controls the level of the voice sent to the Preset FX and the Main Output.
Send Aux 1-3
Controls the level of the voice sent to the Aux Send 1, 2 or 3 FX processors.
Wet/Dry Mix
Controls the Wet/Dry mix sent to the Preset FX.
Amp Envelope Rates
Positive values decrease the rates of all amp envelope stages.
Amp Env. Attack
Positive values decrease the attack rate of the amp envelope.
Amp Env. Decay
Positive values decrease the decay rate of the amp envelope.
Amp Env. Release
Positive values decrease the release rate of the amp envelope.
Filter Envelope Rates
Positive values decrease the rates of all filter envelope stages.
Filt Env Atk, Dcy, Rel
Same as for Amplifier. See above.
Filter Env. Trigger
A positive-going, zero-crossing value retriggers the envelope.
Aux. Envelope Rates
Positive values decrease the rates of all Aux. envelope stages.
Aux Env Atk, Dcy, Rel
Same as for Amplifier Envelope parameters. See above.
Aux Env. Trigger
A positive-going, zero-crossing value retriggers the envelope.
LFO Rate (1 & 2)
Positive values increase the LFO rate.
LFO Trigger (1 & 2)
A negative-going, zero-crossing value resets the LFO to zero.
Lag Processor (0&1)
Inputs for Lag Processors 0 & 1.
Summing Amp
Input to the Summing Amp.
Switch
Input to the Switch processor.
Absolute Value
Input to the Absolute Value processor.
Diode
Input to the Diode processor.
Flip-Flop
Input to the Flip-Flop processor.
Quantizer
Input to the Quantizer.
Gain 4x
Input to the 4x Amplifier.
Cord 1 - 36 Amount
Controls the amount of PatchCords 1-36.
Summary of Contents for ProteusX
Page 1: ...E MU Systems 1 Desktop Sound Module Desktop Sound Module Operation Manual Operation Manual...
Page 10: ...10 Proteus X Operation Manual...
Page 54: ...4 Multisetup Global Controls Working with Multisetups 54 Proteus X Operation Manual...
Page 134: ...7 Effects Effects Descriptions 134 Proteus X Operation Manual...